Whirlpool dishwashers are well known among many homeowners for their efficient washing system that thoroughly cleanses dishes. However, even the best dishwashers sometimes have problems drying dishes. This is not uncommon even though manufacturers try their best to prevent water from being trapped inside the dishwasher.
There are some fixes that you can try to resolve any problems your dishwasher may have with drying dishes or not doing it at all. Some of the most common reasons for this problem are listed below along with their respective solutions.
1) It’s Not Getting Enough Time to Dry Dishes
If your dishwasher is not getting enough time to dry the dishes properly, you may want to check how often it runs and when. That is because running your dishwasher during off-peak hours when electricity costs less will add more time for the interior heating system to heat up and dry the dishes completely. Dishwashers also need a minimum amount of time before they actually start drying dishes so don’t be surprised if your dishes are not dry even after the dishwashing cycle is finished.
2) Not Enough Room for Air Flow
There needs to be enough room for air flow in order for heat and humidity to evaporate water. If there isn’t, the lack of air movement will hinder proper evaporation of water droplets. This will result in trapped water inside the dishwasher which will lead to your clean dishes ending up with moisture on them.
If there is already enough room for air flow, make sure that nothing is blocking it like a window or any kitchen appliance. You can also try cleaning the vent at the back of your dishwasher since dirt buildup may block the air flow.
Advance Appliance Ltd. As the leading national service and repair company for all major brands, they are able to diagnose any appliance problem quickly with expert workmanship that will not leave you without your appliances for long! Give them a try if you do not want yourself get into trouble
3) Dishwasher Not Leveled Correctly
To prevent water from getting trapped inside your dishwasher, you need to make sure that it is leveled correctly. If the dishwasher machine is not level, some areas might be lower than others which will lead to water pooling. Elevate one of the legs on your dishwasher and make sure that it is level and sturdy.
4) Dishwasher Filter Not Clean
If your dishwasher filter is clogged with any food debris, this will result in water not being drained completely from the sink when you run the dishwashing cycle. You can check if your filter needs to be cleaned by removing it. If you see a buildup of food debris inside the filter, clean it out using hot water and dishwashing detergent.
5) No Water At All Coming Out of Dishwasher Faucet
If no water is coming out of your kitchen faucet when you run your dishwasher, this may be caused by low water pressure. This happens because if there isn’t enough water pressure in the main line, then there won’t be any water coming out of your faucet. Check your water valves and add a quarter cup of salt to the hot water tank if you have hard tapwater.
Dishwashers are very efficient when it comes to cleaning dishes, but they have their own problems too. Make sure that you know how to properly maintain and care for your dishwasher so that the best results will be achieved. If you cannot find and fix the problems then contact appliance repair near you and if you are living in Edmonton, then it is best to contact appliance repair Edmonton who are expert just like Advance Appliance LTD.
The post 5 Reasons Why Your Whirlpool Dishwasher Not Drying Dishes and Fixes appeared first on Appliance Repair – ADVANCE Appliance ltd.